Due to the fact that the bulk of the unit hangs out of your window and is exposed to the elements year round, window air conditioners have a greater tendency of breaking down when you need them cooling the most.  Now, being the air conditioner guy that I am, you would expect me to tell you to call out your local AC repairman because it is usually an easy fix.  However, with labor prices going up and up, and the price of window air conditioners coming down (about $300-$400 for a descent air conditioning unit) the right move may be to scrap the old junker and order up a new one, especially if your existing unit is outside of any manufacturer warranty period.

If you run the numbers and decide that buying a new unit is the thing to do, then here is a way to cut your costs even further.  DO NOT THROW YOUR OLD UNIT IN THE TRASH.  You need to take it down to your local scrap metal place and cash it in for around $50 worth of Copper Tubing that is inside of the unit.  You will get the most money form the scrap yard if you remove the copper from the unit yourself, otherwise they will factor their labor into the the overall value and reduce your take considerably. Another thing that I would advise is to call around to find out what they are paying for copper before hauling it down there and compare that to the price of copper on the open market.

Most scrap metal places will pay you cash on the spot.  Now you just cut $50 off he cost of your new unit.  Either that or you can just pocket the found money and not tell your spouse that I told you about it (-;

About a month ago as the temperatures were sustaining in the 100+ range here in Texas, we noticed that our 20-year old Trane system was running for about 5 minutes, cutting off for about 2 minutes, thn kicking in again.  The temperature was getting down to the 81 degree setting on the thermostat (…you see Mr. Obama, not everyone sets their air conditioning to 78), but the humidity was never getting below 50% because the unit didn’t run long enough to effectively bring down the humidity.  Basically it was short-cycling.  Now, we’ve never had this problem in the past so we ran a full perventative maintenance on the system and found that the freon level was down about 20%, but mostly that the clutch on the blower motor was starting to fail.  It was drawing some serious amps in order to kick in.  I could only imagine what the electricty bill was going to look like for this month!

Even though the Trane unit was still working, we decided it was time to get serious about replacing this old unit before we experienced an outage and at the same time, reduce our electricty bill.  Another thing that factored into our decision was that the adjoining central heating system was one of the old pilot light jobs that have been phased out some years ago due to safety concerns.  We contacted a couple of home air conditioners installers who quoted us on a new central air conditioning and heating systems and we finally settle on a Carrier 24ABB4 (14 SEER Rating) split system with Puron refrigerant, and a Carrier 58STA/STX heater.  There were more energy efficient systems available with a better SEER rating that would quality for the new tax rebate, but we could not justify the increased cost vs savings.  The system we chose will give us the best bang for the buck.

Now that we’ve signed on the bottom line and scheduled the installation date, all that is left is the perparation.  In the next post, we’ll tell you all about the installation process and the decisions we needed to make along the way.